+49 (0) 911 / 47 58-4
Grundig Business Systems

Digta SonicMic 3

• USB dictation microphone with button control
• PC mouse control with trackpad and mouse buttons
• recording functions optimized for speech recognition
• buttons configurable with speech recognition commands and hotkeys

more details
Article number: GDD8300

Box contents Digta SonicMic 3 with trackpad and mouse buttons, including Digta Configurator desk software for configuration and driver as download at www.grundig-gbs.com.

Digta SonicMic 3 with intuitive button control, individually configurable

The Digta SonicMic 3 is a button-controlled dictation microphone. The record/playback rocker and the forward and reverse buttons can be operated with minimal thumb movement because the buttons are located ergonomically in the middle of the device’s front side. The other function buttons can also be configured for a personalised workflow. Configure the Digta SonicMic 3's buttons for speech recognition commands or hotkeys, for instance! This makes dictation especially easy.

The lightweighted Digta SonicMic 3 allows you to dictate longer without getting tired. Its rounded edges always provide your hand a firm purchase.

Digta SonicMic 3 with intuitive button control, individually configurable

Simple control with trackpad and mouse buttons on the Digta SonicMic 3

Simple control with trackpad and mouse buttons on the Digta SonicMic 3

The Digta SonicMic 3 features an easily controllable trackpad for precise movement of the mouse pointer which has already proven itself in smartphones. You can, of course, adapt the speed of mouse control to the size of your monitor and positioning precision. To the left and right of the trackpad are two “mouse buttons”.

Ideal for speech recognition

To use a headset for dictations, you would have to painstakingly learning speech commands. The Digta SonicMic 3 allows you to avoid this process, because it features a direct interface to DigtaSoft Voice and Dragon NaturallySpeaking. This allows you use the microphone buttons for all important speech recognition commands with the Digta SonicMic 3. The control keys can be configured as requested by means of an intuitive configuration tool.

The Digta SonicMic 3's integrated sound card and loudspeaker allows you to achieve crystal-clear playback. The frequency-optimized positioning of the microphone capsule and the pop filter provide an outstanding speech clarity. The polished surfaces of the Digta SonicMic 3 buttons also ensure that touch noises are not recorded. Nuance, the leading provider of speech recognition solutions, has already tested the microphone and awarded it the highest rating for recognition precision: six stars. These features make this microphone ideal for use with speech recognition.
Ideal for speech recognition
ProductDigta SonicMic 3
CategoryHardware
VersionV 1.0
Hardware interfacesUSB 1.1 or higher
Dimensions (L x B x H)about 183 x 45 x 25 mm Cable length about. 2.45 m
Weightabout 3.99 oz (without cable)
ConnectionsUSB port USB 2.0 Full Speed (compatibility from USB 1.1)
Configuration softwareDigta Configurator desk
Frequency range/Recording qualityRecording 200 Hz – 15,000 Hz Playback 200 Hz – 5 kHz
Internal speakerDynamic loudspeaker, diameter 28 mm, power output 750 mW
Operating temperature rangesStorage temperature: -20° C to +70° C Operating temperature: -5° C to +45° C
CasingShock-absorbing, high-quality plastic, unpainted; semi-gloss pitted housing shells and high-gloss polished buttons for reducing finger movement noise Non-skip tabletop on the bottom side
Configurable function keys3
In-built microphones1
Index functionyes
Info functionyes
Sampling ratesRecord: 11.025 – 12 – 16 - 22.05 - 32 kHz, 16 bit mono playback; 11,025 – 12 – 16 - 22.05 - 32 – 44,1 - 48 kHz, 16 bit mono
Key controlyes
MouseOptical trackpad, approximately 8x8 mm, adjustable mouse pointer speed, left mouse click executed by clicking the trackpad (can be deactivated), left and right mouse button (can be deactivated)
Release dateApr 17