+49 (0) 911 / 47 58-4
Grundig Business Systems

Digta SonicMic II Classic with DigtaSoft One

• USB dictation microphone with extra large slide switch
• integrated sound card (best suited for speech recognition)
• resistance of the slide switch can be adapted to individual needs
• including software DigtaSoft One for beginners / transitioners

more details
Article number: PFU8200

Box contents Digta SonicMic II Classic, microphone stand, turnscrew for adjusting sliding switch resistance, single user licence for PC software DigtaSoft One

Ergonomically shaped extra wide slide switch

The smooth, extra slim design of the Digta SonicMic II Classic allows effortless and comfortable recordings of longer dictations. When you need a longer break during recording, simply place your Digta Sonic Mic II Classic into the fitting microphone stand!

The extra wide, comfortable slide switch of the Digta SonicMic II Classic allows perfect operation of the four switch settings. What’s special about the Digta SonicMic II Classic: The resistance of the slide switch can be adapted to individual needs.
Ergonomically shaped extra wide slide switch
Function keys freely programmable

Function keys freely programmable

The different function keys of the Digta SonicMic II Classic are freely programmable with three functions. The function buttons are freely programmable via software to control dictation software and other programmes, including setting the maximum priority for a dictation or switching on hotkey functions.

Ideal dictation microphone for speech recognition

By means of a direct interface to DigtaSoft Voice and Dragon NaturallySpeaking all important speech recognition commands can be performed directly via slide switch or by pressing a button. You do not have to learn the important speech commands. The microphone mute function during stop position of the slide switch prevents speech recognition errors.

The Digta SonicMic II Classic has an additional built-in sound card. The card allows optimum speech recording and playback. The Digta SonicMic II Classic therefore is ideally suited for use with speech recognition.
Ideal dictation microphone for speech recognition
ProductDigtaSoft One
Memory (RAM)50 MB (32 and 64 Bit)
Processor1 GHz processor or higher
Hard disk space150 MB additionally about 1 MB for 10 minutes of dictation recordings
Operating systemMicrosoft® Windows 10 / 8.1 / 8 / 7 (64 Bit and 32 Bit)
E-Mail interfacesMAPI POP3
E-Mail programmesMicrosoft® Outlook 2016 / 2013 / 2010 / 2007 (only 32 Bit)
Word processing programmesMicrosoft®Word 2016 / 2013 / 2010 / 2007 Microsoft®Texteditor Microsoft®Wordpad
Hardware interfacesUSB 1.1 Port or higher
Release dateJul 17
ProductDigta SonicMic II Classic
VersionV 0.39
Hardware interfacesUSB 1.1 or higher
Dimensions (L x B x H)about 215 x 38 x 18 mm Cable length about. 2.45 m
Weightabout 3.70 oz (without cable)
ConnectionsUSB port USB 2.0 Full Speed (compatibility from USB 1.1)
Configuration softwareAdapterServer Config
Frequency range/Recording quality200 Hz- 12,500 Hz
Internal speakerDynamic speaker, diameter 28 mm, power output 200 mW
Operating temperature rangesStorage temperature: -20° C to +70° C Operating temperature: -5° C to +35° C
CasingShock absorbing high quality plastic Colour: low gloss black
Slide switchSlide switch with four functions
Configurable function keys3
In-built microphones1
Sampling rates11,025 - 12 - 16 - 22,05 - 44,1 kHz, 16 bit mono
Release dateFeb 17