Any questions?
We will help you
+49 (0) 911 / 47 58 1 from 8 a.m. to 5 p.m.

Digta SonicMic II Classic

  • USB dictation microphone with extra large slide switch
  • configurable function keys
  • including microphone stand

Ergonomic shape and extra-wide sliding switch

The Digta SonicMic II Classic´s slim, elongated design ensures a relaxed arm position during dictation. If you want to take a break from dictation, you can place your Digta SonicMic II Classic in its compact microphone stand. The Digta SonicMic II Classic’s distinctive extra-wide sliding switch gives you easy access to the four switch positions. What is special about the Digta SonicMic II Classic is that the sliding switch is individually adjustable.


Individually configurable function buttons

The Digta SonicMic II Classic is equipped with multiple function buttons. Each can have up to three settings: a software application allows you to configure the function buttons to control the dictation software and other programmes by setting the maximum priority for a dictation or triggering hotkey functions, for instance.


Variants

Digta SonicMic II Classic with DigtaSoft One

Article number: PFU8200
Short description

With this USB dictation microphone dictations can be recorded easily with a single hand. The sensitivity of the slide switch can be configured individually.

Scope of delivery

Digta SonicMic II Classic, microphone stand, turnscrew for adjusting sliding switch resistance, single user licence for PC software DigtaSoft One

Digta SonicMic II Classic with DigtaSoft Pro

Article number: PFU8300
Short description

System solution for desktop dictation workstation consisting of a Digta SonicMic II Classic dictation microphone and PC software DigtaSoft Pro, including a single user license. The tension of the slide switch latch can be individually adjusted.

Scope of delivery

Digta SonicMic II Classic, screwdriver for adjusting the tension of the slide switch, microphone stand. Single user licence for PC software DigtaSoft Pro / One

Downloads

System requirements

Digta SonicMic II

Category
Hardware
Version
V 0.39
Hardware interfaces
USB 1.1 or higher
Dimensions (L x B x H)
ca. 215 x 38 x 18 mm cable length approx. 2,45 m
Weight
approx. 105 g (without cable)
Connections
USB-Interface USB 2.0 Full Speed (compatible from USB 1.1)
Comments
Slot für external barcode reader DigtaScan 404
Configuration software
AdapterServer Config
Frequency range/Recording quality
200 Hz- 12.500 Hz
Internal speaker
Dynamic loudspeaker, diameter 28 mm, output power 200 mW
Operating temperature ranges
Storage temperature: -20° C to +70° C Operating temperature: -15° C to +35° C
Casing
Shock-absorbing, high-quality plastic Colour low gloss black
Slide switch
4-function slide
Configurable function keys
3
In-built microphones
1
Sampling rates
11,025 - 12 - 16 - 22,05 - 44,1 kHz, 16 Bit mono
Mouse
Mouse control (trackpoint), pointer speed separately adjustable 2 mouse buttons on the back, reversible to function buttons on the top right/left hand operation
Release date
Jan 22